The Flux helmet offers a deep rear profile for more coverage and 20
vents to keep your head cool and comfortable.

• Deeper rear profile EPS shell offers more comprehensive coverage
  than traditional XC helmet
• In-Molding technology molds the outer shell onto the EPS foam
• Detox retention system
• Visor and spoiler
• 20 strategically placed vents
• Inset chin straps
• Testing standards: CPSC, CE: EN 1078, AS/NZS 2063

Sizing

Revolver Snow Helmet
The Revolver is a low profile, durable, hard shell with just the right amount of brim and style. Features like the interior subliner, our Interior Goggle Channel which makes room for your strap, and Stack Vent that helps keep your goggles fog free, give you all the options you need to dial in your set up. Think of it as a snotty little brother to the Shiv.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• Features: Hardshell construction; Interior subliner; Interior Goggle Channel ; 6 Super Cool vents with mesh covers; Stack Vent
• Compatibility: Compatible with all after market TuneUps systems
• Certification: CE EN1077

Tech:
FIT KIT PAD SYSTEM: Giro’s Fit Kit pads
system allows you to dial in your fit using different thickness comfort
pads on the interior of the helmet. Just pull the hook and loop backed
pads out and swap them out for the thickness you need.
INTERIOR SUBLINER:
The interior subliner allows you to customize your pads or pull them
out completely for the ultimate in rider tuned fit. A soft Velcro free
fabric is laminated to the EPS foam on the inside of the helmet to make
the fit more comfortable if you want to remove the padding to
accommodate a beanie or goggle strap.

SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into
the helmet while pushing heat and stale air out. By maximizing
efficiency and optimizing vent shapes, the collective cooling power of
Super Cool vents helps to regulate your core temperature and keep you
feeling fresh all day.

STACK VENT: Giro’s Stack Vent was developed based on research showing the majority of the warm air that can cause fogging exhausts from the center top vent of the goggle. Aligning the Stack Vent in the helmet with the center vent of your goggles helps to keep them clear and fog free while maintaining total helmet and goggle integration.
INTERIOR GOGGLE CHANNEL: A removable pad at the base of the helmet conceals a deep channel that allows more room for your goggle strap if you want to run it inside your helmet. This translates to maximum comfort and insures your helmet maintains a low profile.
HARDSHELL CONSTRUCTION: A hard shell helmet is made up of a durable plastic shell that is laminated to an EPS foam liner. They provide performance at a great value.

Seam Snow Helmet
The Seam is the perfect all mountain helmet. An improved Thermostat™ vent system, our Stack Vent, and a feather light weight will keep your temp under control, your goggles clear and your comfort level at an all time high. Finish it off with the best fit system ever made for a snow helmet and you are ready for a full day on the mountain.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• Features: In-mold construction; X-Static anti bacterial padding; 12 Super Cool vents with Thermostat control; Stack Vent
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into
the helmet while pushing heat and stale air out. By maximizing
efficiency and optimizing vent shapes, the collective cooling power of
Super Cool vents helps to regulate your core temperature and keep you
feeling fresh all day.

STACK VENT: Giro’s Stack Vent was developed
based on research showing the majority of the warm air that can cause
fogging exhausts from the center top vent of the goggle. Aligning the
Stack Vent in the helmet with the center vent of your goggles helps to
keep them clear and fog free while maintaining total helmet and goggle
integration.
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature 

IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

THERMOSTAT CONTROL: Thermostat ventilation control allows you to custom tune airflow instantly with a simple, low profile control button on the outside of the helmet. No other system is faster or easier to adjust, and nothing is more effective at keeping you comfortable.

X-STATIC PADDING: In addition to being very comfortable, the X-Static pads provide anti-microbial properties to help keep your helmet fresher, longer. The pads are also machine washable. 

Encore
Now certified CPSC multi sport, the Encore has you covered for skate, bike, and snow. Giro’s Fit Kit pad system lets you customize your fit to accommodate your goggle set up. 13 vents with mesh covers keep ventilation flowing, but snow out.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• Features: Hardshell construction; 13 Super Cool vents with mesh covers
• Compatibility: Compatible with all after market TuneUps systems except Wireless
• Certification: ASTM 2040 / CE EN1077 / CPSC

Tech:
FIT KIT PAD SYSTEM: Giro’s Fit Kit pads system allows you to dial in your fit using different thickness comfort pads on the interior of the helmet. Just pull the hook and loop backed pads out and swap them out for the thickness you need.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
HARDSHELL CONSTRUCTION: A hard shell helmet is made up of a durable plastic shell that is laminated to an EPS foam liner. They provide performance at a great value.

Women’s Sheer
Plush finishing details, an amazing fit, and a feather light weight make the Sheer a great choice for women who want performance and style. Our Stack Vent will help keep your goggles clear with seamless goggle, helmet ventilation integration.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• Features: In-mold construction; 12 Super Cool vents with Thermostat control; Stack Vent  
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
STACK VENT: Giro’s Stack Vent was developed based on research showing the majority of the warm air that can cause fogging exhausts from the center top vent of the goggle. Aligning the Stack Vent in the helmet with the center vent of your goggles helps to keep them clear and fog free while maintaining total helmet and goggle integration.

G9
How do you replace the best selling snow helmet ever made? Preserve its core and make it better by bringing it up to date with clean lines and a hint of attitude. The G9 represents form complimenting function that can be applied to any terrain or riding style. The G9 is offered in an XL size with the In Form fit system which measures 62.5-65cm.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• XL (62.5 – 65 cm)
• Features: In-mold construction; 15 vents Super Cool vents with Weatherstrip vent plugs
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

Women’s Ember
Beautiful graphics and top level performance make the Ember an easy pick for women who are looking for all mountain versatility. Giro’s In Form fit system insures a great fit with seamless goggle integration.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• Features: In-mold construction; 15 Super Cool vents with Weatherstrip vent plugs
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

G10
The G10’s light weight, low profile shape makes it the most popular all mountain helmet on the market. Three ventilation settings and an incredible fit make it perfect for whatever the mountain throws at you.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• Features: In-mold construction; 14 Super Cool vents with Thermostat control
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

Women’s Prima
The Prima delivers performance and style specifically for women. Equipped with Giro’s In Form fit system and a three stage ventilation system it is ready for all riding conditions. Refined graphics and a contemporary color palette make it an easy fit to almost any outerwear set up.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• Features: In-mold construction; 16 Super Cool vents with Thermostat control and Weatherstrip vent plugs
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

Shiv Snow Helmet
The Shiv taps into the clean, utilitarian shape of skate buckets from years ago, but brings some stealthy tech to the table. In Mold construction keeps it super light and our interior subliner lets you run your goggle inside your lid. The Shiv is the choice for almost Giro’s entire snow team.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
• S (52 – 55.5 cm)
• M (55.5 – 59 cm)
• L (59 – 62.5 cm)
• Features: In-mold Construction; Interior subliner; 8 Super Cool vents with Weatherstrip™ vent plugs
• Compatibility: Compatible with all after market TuneUps systems
• Certification: CE EN1077

Tech:
FIT KIT PAD SYSTEM: Giro’s Fit Kit pads system allows you to dial in your fit using different thickness comfort pads on the interior of the helmet. Just pull the hook and loop backed pads out and swap them out for the thickness you need.
INTERIOR SUBLINER: The interior subliner allows you to customize your pads or pull them out completely for the ultimate in rider tuned fit. A soft Velcro free fabric is laminated to the EPS foam on the inside of the helmet to make the fit more comfortable if you want to remove the padding to accommodate a beanie or goggle strap.

SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

Women’s Grove
Based on Giro’s popular G10 model, but finished specifically for women, the Grove is a perfect all mountain helmet. Plush ear pads and a select color pallette make the Grove stand out from the norm.

• Sizing: Measure around the head just above the ears where the sweat band of a hat would naturally lay
  • S (52 – 55.5 cm)
  • M (55.5 – 59 cm)
• Features: In-mold construction; 14 Super Cool vents with Thermostat control
• Compatibility: Compatible with all after market TuneUps systems
• Certification: ASTM 2040 / CE EN1077

Tech:
IN FORM FIT SYSTEM: The In Form system makes it easy to dial in a custom fit in seconds – even with gloves on. An ergo-friendly dial at the base of the helmet provides up to 6cm of adjustment and enhanced stability while the vertical tuning feature accommodates different goggles and head shapes for a custom fit, free of gaper gap.
SUPER COOL™ VENTS: Super Cool vents pull cool, fresh air into the helmet while pushing heat and stale air out. By maximizing efficiency and optimizing vent shapes, the collective cooling power of Super Cool vents helps to regulate your core temperature and keep you feeling fresh all day.
IN-MOLD CONSTRUCTION: In-mold construction fuses a tough polycarbonate outer shell with the helmet’s impact-absorbing foam liner. The fusion process allows us to sculpt better ventilation systems, so In-mold helmets can be lighter and cooler than traditional helmets.

The Flux helmet offers a deep rear profile for more coverage and 20
vents to keep your head cool and comfortable.

• Deeper rear profile EPS shell offers more comprehensive coverage
  than traditional XC helmet
• In-Molding technology molds the outer shell onto the EPS foam
• Detox retention system
• Visor and spoiler
• 20 strategically placed vents
• Inset chin straps
• Testing standards: CPSC, CE: EN 1078, AS/NZS 2063